963K WH - 2015, EU, NACD, South Korea Waste Handler

Request a Quote

  • This field is for validation purposes and should be left unchanged.

963K WH – 2015, EU, NACD, South Korea

From loading to sorting to excavation and spreading cover material, the track loader is one of the most versatile pieces of equipment in your landfill or transfer station. The Waste Handling Arrangement features added guarding and seals to gives you a machine that is purpose built to take on the challenges of waste applications. A choice of buckets and track shoes allow you to further optimize the machine for greater performance and service life. The new 963K offers added fuel efficiency over the previous model, as well as greater comfort and improved implement and steering response. The 963K meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards.
  • Standard Equipment
  • Specs
  • Features
  • Media

Standard Equipment

  • POWER TRAIN
    • Cat C7.1 ACERT diesel engine
    • Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • Twin turbocharged with ATAAC
    • Modular cooling system for engine air intake, oil and water
    • Fan radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
    • Electro Hydrostatic Control (EHC) for transmission with travel and work modes
    • Electric fuel pump
    • Water separator
    • Air cleaner dry-type, axial seal with integral precleaner and dust ejection system, electronic filter condition indicator
    • Engine mounted aftertreatment
    • Muffler, under hood
    • Starting aid, glow plug
    • Cat extended life coolant
  • UNDERCARRIAGE
    • Cat Enhanced Sealed and Lubricated Track (ESALT) tracks
    • Track guiding guards, end section
    • Track adjuster, hydraulic
    • Sprocket rims, with replaceable bolt-on Tough Steel segments
    • Guards, sprocket
    • Seven track rollers per side, with two upper carrier rollers, lifetime lubricated
    • Idlers, conventional type, lifetime lubricated
    • Oscillating track roller frames
  • ELECTRICAL
    • Alternator, 24V, heavy duty brushless
    • Alarm, backup
    • Horn, electric
    • Two heavy duty batteries, high output, maintenance free, 1,120 CCA
    • Switch, main disconnect
    • Starter, electric (heavy duty, 24V)
    • Four halogen lights, two facing forward, roof mounted; two facing rearward integrated into A/C unit
  • OPERATOR ENVIRONMENT
    • Pressurized, sound suppressed, ROPS/FOPS
    • Cab with tinted glass and right side sliding window
    • Air conditioning and heating
    • Heater/defroster with automatic temperature control
    • Seat, fabric-covered, air suspended adjustable
    • Electro hydraulic, seat mounted control levers with faster processing
    • Seat belt, retractable, with indicator on dash
    • Electronic Monitoring System with gauges for: – Engine coolant temperature – Hydraulic oil temperature – DEF level – Fuel level
    • Mirror, rearview, inside, adjustable
    • Radio ready – includes 24V to 12V converter, speakers, antenna and two 12V power outlets
    • Coat hook
    • Storage compartments under left armrest
    • Document holder on right console
    • Floor mat, rubber, heavy duty
    • Windshield washers and wipers, multiple speed front and rear
    • Durable metal roof
    • Parking brake switch and “brake-on” indicator light
    • Fender
  • OTHER STANDARD EQUIPMENT
    • Sound suppression, exterior
    • Z-bar loader linkage
    • Load sensing variable displacement implement pump
    • Implement cylinders sensors
    • Operator programmable lift and tilt
    • Engine enclosure with lockable doors
    • Radiator core 6.5 fpi, debris resistant
    • Hinged radiator guard and swing out fan
    • Guards, full bottom
    • Ecology drains on hydraulic oil tank
    • Product Link ready
    • Oil sampling valves
    • Hoses, Cat XT™
    • HYDO™ Advanced 10

Specs

Overview

Long Name:
963K WH Waste Handler Track Loader
Name:
963K WH
Brand:
Caterpillar
Status:
Current

Engine

Engine Model:
Cat® C7.1 ACERT™
Engine Power (Maximum) – ISO 14396:
221 hp / 165 kW

Weights

Operating Weight:
46518 lb / 21100 kg

Buckets

Capacity - General Purpose Landfill:
4.05 yd3 / 3.1 m3
Capacity – General Purpose:
3.2 yd3 / 2.45 m3
Capacity – Landfill:
4.05 yd3 / 3.1 m3
Capacity – Multi-Purpose:
2.48 yd3 / 1.9 m3
Capacity – Performance Series:
3.66 yd3 / 2.8 m3
Bucket Width – Landfill:
102.8 in / 2612 mm
Bucket Width – General Purpose:
102.8 in / 2612 mm
Bucket Width – Performance Series:
106.8 in / 2712 mm

Undercarriage

Track Shoe Width – Standard:
21.6 in / 550 mm
Track Shoe Width – Optional:
17.7 in / 450 mm
Track Gauge:
72.8 in / 1850 mm
Track on Ground:
100 in / 2542 mm
Ground Contact Area – Standard Shoe:
4340 in2 / 2.8 m2
Ground Contact Area – Optional Shoe:
3565 in2 / 2.3 m2
Ground Pressure – Standard Shoe:
10.3 psi / 70.9 kPa
Ground Pressure – Optional Shoe:
12.4 psi / 85.5 kPa
Track Shoe Type:
Double Grouser

Service Refill Capacities

Fuel Tank:
84.5 gal / 320 L
Cooling System:
8.45 gal / 32 L
Crankcase (with filter):
4.4 gal / 16.5 L
Final Drives (each):
4 gal / 15 L
Hydraulic Tank:
23.7 gal / 90 L

Ripper Specifications

Type:
Radial
Number of Pockets:
3
Overall Width/Beam:
76.7 in / 1950 mm
Penetration:
11.6 in / 295 mm
Ripping Width:
72.3 in / 1836 mm

Engine

Engine Power (Maximum) – ISO 14396 (DIN):
224 hp / 165 kW
Net Power (Rated) – ISO 9249/SAE J1349:
193 hp / 144 kW
Net Power (Rated) – ISO 9249/SAE J1349 (DIN):
196 hp / 144 kW
Emissions:
Tier 4 Final/Stage IV/Korea Tier 4
Bore:
4.13 in / 105 mm
Stroke:
5.31 in / 135 mm
Displacement:
427.8 in3 / 7.01 L

Undercarriage

Track Rollers – Each Side:
7
Number of Shoes – Each Side:
38
Grouser Height – Double Grouser:
1.65 in / 42 mm

Drive System

Track Motor:
Two, variable displacement, bent axis motors
Drive System:
Hydrostatic drive with infinite machine speeds to 10.0 km/h (6.2 mph)
Drive Pump:
Two, variable displacement, slipper-type axial piston pumps
Relief Valve Setting:
6890 psi / 47500 kPa

Service Refill Capacities

Pivot Shaft:
0.5 gal / 1.8 L
DEF Tank:
4.22 gal / 16 L

Buckets

Bucket Width – Multi-Purpose:
101.3 in / 2575 mm

Bucket Cycle Times

Lift:
5.5 seconds / 5.5 seconds
Power Down:
3.7 seconds / 3.7 seconds
Float Down:
2.0 seconds / 2.0 seconds
Dump at Maximum Height (from full rackback):
1.3 seconds / 1.3 seconds
Rackback at Maximum Height (from full dump):
1.4 seconds / 1.4 seconds

Ripper Specifications

Shank Cross Section:
58.5 mm × 138 mm (50 in × 5.4 in)
Ground Clearance:
23.4 in / 595 mm
Cylinders – Bore:
4.5 in / 114.3 mm
Cylinders – Stroke:
11.3 in / 289 mm
Added Machine Length with Ripper in Transport Position:
24.0 in / 610 mm

Hydraulic System – Equipment

Type:
Closed center, load sensing piston
Output:
60.8 gal/min / 230 L/min
Main Relief Valve Setting:
3989 psi / 27500 kPa

Standards

ROPS:
Meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994 DLV criteria SAE J397B, ISO 3164:1995
FOPS:
Meets SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II DLV criteria SAE J397B, ISO 3164:1995
Brakes:
Meet SAE J/ISO 10265 MAR99 ISO 10265:1998
Cab:
Declared dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:2008” is used to measure value for enclosed cab
Cab:
Hearing protection is recommended when operating with an open operator station and cab
Cab:
Declared exterior sound power level is 108 dB(A) when value is measured according to “ISO 6395:2008”
Cab:
The labeled sound power level is 111 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC.

Dimensions (Approximate)

Overall Machine Width without Bucket: With Standard Tracks – 550 mm (21.6 in) Shoes:
94.5 in / 2400 mm
Overall Machine Width without Bucket: With Narrow Tracks – 450 mm (17.7 in) Shoes:
90.5 in / 2300 mm
Ground Clearance:
18.5 in / 471 mm
Machine Height to Top of Cab:
130.9 in / 3325 mm
Length to Front of Track:
197.0 in / 5005 mm
Overall Machine Length*:
278.0 in / 7063 mm
Carry Position Approach Angle:
15°
Digging Depth*:
5.4 in / 138 mm
Maximum Rollback at Ground:
43°
Maximum Rollback at Carry Position:
50°
Bucket Height in Carry Position:
18.0 in / 457 mm
Reach at Full Lift Height and 45° Dump*:
54.0 in / 1373 mm
Clearance at Full Lift Height and 45° Dump*:
114.8 in / 2915 mm
Maximum Rollback, Fully Raised:
52°
Maximum Dump, Fully Raised:
53°
Grading Angle:
63°
Height to Bucket Hinge Pin:
155.1 in / 3940 mm
Overall Machine Height, Bucket Fully Raised:
212.7 in / 5402 mm
Height to Top of Seat with Headrest:
110.6 in / 2808 mm
Height to Top of Stack:
115.7 in / 2940 mm
Ramp Angle:
29°
Note:
* With general purpose bucket and extra duty teeth.

Features

963K Waste Handler Features

Purpose-built for performance

(1) Final drive seal guards feature a metallic outside ring welded to the final drive to help protect seals from damage due to wrapping of wire or plastic.

(2) Idler guards protect and limit the entry of debris to the tensioning system. Includes scrapers mounted around idler.

(3) Idler with seal protection has steel rings integrated into the idler design. Helps keep wire, strapping, etc. from damaging the Duo-Cone™ seals.

(4) Engine compartment seals limit debris entry and plugging of radiator core. Gaps sealed between sheet metal and other components for added protection.

(5) Windshield screen helps protect windshield and operator from breakage and debris.

(6) Guarding helps protect lift lines coming out of the chassis and lift cylinder hydraulic tube.

(7) Tilt cylinder guard helps protect rod surface from damage by falling debris.

(8) Guarding helps protect bucket hydraulic lines from damage.

963K Waste Handler Features

Purpose-built for performance

(9) Turbine precleaner reduces particles coming into the engine air inlet for extended engine filter life.

(10) Hydraulic reversible fan purges debris from the radiator and engine compartment air inlets by reversing the airflow. Limits radiator plugging, increases maintenance interval.

(11) Radiator fan folds out for easier cleaning/maintenance access to fan and radiator. Angled louvers direct air upward away from the ground.

(12) Heavy duty rear bumper offers optimal protection to the back of the machine – especially the cooling system. Includes a heavy duty grill with latch for quick opening, as well as a hitch.

(13) Optional rear vision camera/display helps improve visibility behind the machine.

(14) Rear striker bars help keep trash from damaging the fenders. Highly recommended in waste application to help extend sheet metal life.

(15) Center-hole track is recommended for waste applications. The design allows sprocket to push out debris, helping to reduce packing within the track links. Helps limit wear on track components and extend undercarriage life.

  • Double Grouser Shoes provide good balance of traction and a smooth ride. Recommended over single grouser for reduced damage when working on concrete.
  • Single Grouser Track is aggressive for good chopping action. Offers the best traction in poor underfoot conditions.

(16) The landfill bucket is equipped with heavy-duty trash rack to increase bucket capacity, reduce spillage, and help protect tilt cylinder rod. General purpose and multi-purpose bucket options are also available.

(17) Eight lights – four at top front corner of windshield, four on air conditioning compressor guard – illuminate work area in low light conditions.