The TL943D with Stabilizers – 2015, Tier 4 Final is a Caterpillar® telehandler that was engineered for success with a variety of applications, including maintaining the job site, loading trailers, placing palletized loads and more. This telehandler is an excellent option in terms of fuel efficiency, which helps to keep your operating costs low. With the TL943D with Stabilizers – 2015, Tier 4 Final, you’ll get the work done faster and safer. Learn more about this telehandler and our other CAT equipment when you contact us today.
Request a Quote
TL943D with Stabilizers – 2015, Tier 4 Final
- Specs
Specs
Overview
Long Name:
TL943D Telehandler with Stabilizers
Name:
TL943D with Stabilizers
Brand:
Caterpillar
Status:
Current
Engine
Engine Model:
Cat® C3.4B
Gross Power - Basic:
111 HP / 83 kW
Note:
Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight:
26852 lb / 12180 kg
Operating Specifications
Rated Load Capacity:
9000 lb / 4082 kg
Maximum Lift Height:
43 ft / 13.1 m
Top Travel Speed:
19 mile/h / 29.9 km/h
Capacity at Maximum Height (o/r Down):
7000 lb / 3175 kg
Capacity at Maximum Height (o/r Up):
7000 lb / 3175 kg
Capacity at Maximum Reach (o/r Down):
2700 lb / 1225 kg
Capacity at Maximum Reach (o/r Up):
1100 lb / 499 kg
Tires
Standard:
370/75-28 Duraforce MT
Optional (1):
370/75-28 Foam Duraforce
Service Refill Capacities
Fuel Tank:
38 gal (US) / 145 B
Diesel Exhaust Fluid (DEF) Tank:
5.7 gal (US) / 21.5 B
Boom Performance
Boom Up:
9.9 s / 9.9 s
Boom Down:
8.5 s / 8.5 s
Tele In:
14.6 s / 14.6 s
Tele Out:
14.5 s / 14.5 s
Brakes
Service Brakes:
Inboard wet disc brakes on front and rear axles
Parking Brakes:
Wet disc, spring applied hydraulic release on front axle
Axles
Types (1):
Trunnion mounted planetary 55 degree steer axles.
Hydraulic System
Pump Type:
Variable displacement load sensing axial piston pump
Work Tools
Lumber Forks - Option 1:
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Operating Specifications
Turning Radius - Over Tires:
12 ft / 3.7 m
Work Tools
Carriages - Side Shift:
48 in / 1220 mm
Lumber Forks - Option 2:
[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Operating Specifications
Drawbar Pull - Loaded:
21582 lbf / 96 kN
Tires
Optional (2):
13.00 × 24 Solid
Transmission Speeds
Reverse:
3 speed
Forward:
4 speed
Work Tools
Cubing Forks:
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Swing:
100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)
Tires
Optional (3):
14 × 24-16 PR Air
Work Tools
Pallet Forks - Option 2:
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Hydraulic IT Coupler:
Includes Auxiliary Electrics
Hydraulic System
Auxiliary Hydraulic Pressure:
3481 psi / 240 bar
System Operating Pressure:
3770 psi / 260 bar
Operating Specifications
Frame Leveling:
10°
Hydraulic System
Note:
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Flow:
25 gal/min / 95 l/min
Work Tools
Carriages - Wide Rotate:
72 in / 1829 mm
Carriages - Dual Fork Positioning:
50 in / 1270 mm
Axles
Types (2):
High bias limited slip differential on front axle.
Work Tools
Carriages - Standard Tilt:
50 in / 1270 mm
Carriages - Standard Rotate:
50 in / 1270 mm
Carriages - Wide Tilt:
72 in / 1829 mm
Pallet Forks - Option 3:
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 1:
[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Tires
Optional (4):
14 × 24-12 PR Foam
Service Refill Capacities
Hydraulic System:
49 gal (US) / 184 B
