Every aspect of the TL1055D – 2015, Tier 4 Final is designed to give you improved performance and productivity on the the job site. With the new emissions control system, you’ll gain greater transparency, and there will be no need for operator intervention or disruptions of the work cycle. There’s also a new and improved dashboard that is easier to read and programmable. Furthermore, with enhanced sight lines to the right-rear and right-front corners, this telehandler helps to increase safety on the job site. Learn more and find out if this is the right CAT® machine for your job site. Contact us today.

Request a Quote
TL1055D – 2015, Tier 4 Final
- Specs
Specs
Overview
Long Name:
TL1055D Telehandler
Name:
TL1055D
Brand:
Caterpillar
Status:
Current
Engine
Engine Model:
Cat® C4.4 ACERT™*
Gross Power - Basic:
142.1 HP / 106 kW
Note:
*Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight:
31879 lb / 14460 kg
Operating Specifications
Rated Load Capacity:
10000 lb / 4536 kg
Maximum Forward Reach:
42 ft / 12.8 m
Top Travel Speed:
20.5 mile/h / 33 km/h
Capacity at Maximum Height (o/r Down):
5000 lb / 2268 kg
Maximum Lift Height (o/r Down):
54.9 ft / 16.7 m
Capacity at Maximum Reach (o/r Down):
2500 lb / 1134 kg
Frame Leveling:
10°
Tires
Standard:
400/75-28 Duraforce
Optional:
400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled
Hydraulic System
Pump Type:
Variable displacement load sensing axial piston pump
Service Refill Capacities
Fuel Tank:
38 gal (US) / 145 l
Diesel Exhaust Fluid (DEF) Tank:
5.7 gal (US) / 21.5 l
Hydraulic System:
49 gal (US) / 185 l
Boom Performance
Boom Up:
15 s / 15 s
Boom Down:
13 s / 13 s
Tele In:
16.3 s / 16.3 s
Tele Out:
18.5 s / 18.5 s
Brakes
Service Brakes:
Inboard wet disc brakes on front and rear axles
Parking Brakes:
Wet disc, spring applied hydraulic release on front axle
Axles
Types (1):
Trunnion mounted planetary 55 degree steer axles.
Work Tools
Hydraulic IT Coupler:
Includes Auxiliary Electrics
Carriages - Wide Rotate:
72 in / 1829 mm
Hydraulic System
Auxiliary Hydraulic Flow:
25 gal/min / 95 l/min
Work Tools
Carriages - Side Shift:
48 in / 1220 mm
Carriages - Swing:
100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Carriages - Standard Rotate:
50 in / 1270 mm
Transmission Speeds
Forward:
4 speed
Work Tools
Lumber Forks - Option 1:
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Hydraulic System
Auxiliary Hydraulic Pressure:
3307 psi / 228 bar
Note:
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Work Tools
Carriages - Wide Tilt:
72 in / 1829 mm
Operating Specifications
Turning Radius - Over Tires:
14.1 ft / 4.3 m
Hydraulic System
System Operating Pressure:
3771 psi / 260 bar
Operating Specifications
Drawbar Pull - Loaded:
25605 lbf / 113.9 kN
Work Tools
Lumber Forks - Option 2:
[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Carriages - Standard Tilt:
50 in / 1270 mm
Note:
*For use with 1829 mm (72 in) Lumber Forks.
Axles
Types (2):
High bias limited slip differential on front axle.
Work Tools
Pallet Forks - Option 1:
[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Transmission Speeds
Reverse:
3 speed
Work Tools
Carriages - Dual Positioning:
50 in / 1270 mm
Cubing Forks:
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Fork Extensions*:
90 in / 2300 mm
Pallet Forks - Option 2:
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)