Request a Quote
D5K2 Tier 4 Final/Stage IV
- Standard Equipment
- Optional Equipment
- Specs
Standard Equipment
- ELECTRICAL
- Alternator, 12 volt, 120 Amp, heavy duty brushless
- Alarm, backup
- Batteries (2), heavy duty, maintenance free, 2,000 CCA
- Diagnostic connector
- Horn, electric
- Lights, halogen, 2 front and 2 rear
- Starter, electric, 12 volt
- OPERATOR STATION
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, retractable 76 mm (3 in)
- Foot pads, dash
- Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
- Slope Indicate
- Throttle switch, rotary
- Eco mode
- Controls, seat mounted, fore/aft adjustment
- Armrests, adjustable
- Mirror, rearview, inside
- Single pedal combining deceleration and braking functions
- Independent forward/reverse speed settings
- Power port, 12 volt
- Coat hook
- Storage compartment
- Cup holder
- Floor mat, rubber, heavy duty
- HYDRAULICS
- Hydraulics, 3 valve
- Load sensing hydraulics
- Single lever, three function control
- Hydraulic pump and oil
- Stable blade control
- POWER TRAIN
- Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
- Aftercooler, Air-to-Air (ATAAC)
- Aluminum bar plate cooling system (radiator, power train)
- Air cleaner with precleaner, automatic dust ejection and under-hood intake
- Dual path, closed-loop hydrostatic transmission
- Electric fuel priming pump
- Fuel/water separator
- Automatic Traction Control
- UNDERCARRIAGE
- SALT Undercarriage
- 7 roller track frame
- Track rollers, lifetime lubricated
- Carrier rollers
- Track adjusters, hydraulic
- Guards, front/rear guiding
- Master link
- OTHER STANDARD EQUIPMENT
- Cat Product Link™ PL631 Satellite/PL641 Cellular
- C-Frame, VPAT, hydraulic cylinders and lines
- Lockable engine enclosures
- Front pull device
- Rigid drawbar
- Ecology drains (engine, power train and implement oil and engine coolant)
- Scheduled oil sampling ports (engine, power train implement oil)
- Vandalism protection
- Heavy duty crankcase guard
- ANTIFREEZE
- Extended life coolant, –37° C (–35° F)
Optional Equipment
- ELECTRICAL
- Integrated four front halogen lights, two rear halogen lights
- POWER TRAIN
- Drive, auxiliary
- Installation, winch
- UNDERCARRIAGE
- Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
- Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
- OPERATOR STATION
- Cab with air conditioning*
- Cab, polycarbonate windows and air conditioning*
- Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
- Radio, AM/FM, Bluetooth
- Sound suppression
- *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
- HYDRAULICS
- Hydraulics, 4 valve for use with ripper
- Hydraulics, 4 valve for use with winch
- GUARDS
- Guard, rear, heavy duty
- Grill, radiator, heavy duty
- Guard, track guiding, center
- Guard, track roller, full length
- Screen, rear, cab
- Screen, side, cab
- Screen, rear, canopy
- Screen, front and doors, canopy
- Sweeps, front
- Sweeps, rear
- BLADES
- VPAT XL blade
- VPAT LGP blade
- VPAT Intermediate blade
- REAR ATTACHMENTS
- Drawbar, towing
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
- REAR ATTACHMENT CONTROL
- Control, ripper
- Control, winch
- Control, ripper and winch
- MACHINE CONTROL AND GUIDANCE
- Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
- Power Pitch blade control
- STARTING AIDS
- Heater, engine, coolant, 120 volt
- Starting aid, ether
- OTHER ATTACHMENTS
- Machine Security System
- ANTIFREEZE
- Extended life coolant, –50° C (–58° F)
- FIELD INSTALLED ATTACHMENT
- Winch, hydrostatic
Specs
Overview
Long Name:
D5K2 Track-Type Tractor
Name:
D5K2 Tier 4 Final/Stage IV
Brand:
Caterpillar
Status:
Noncurrent
Engine
Engine Model:
Cat C4.4
Power - Net:
104 HP / 77.6 kW
Displacement:
269 in³ / 4.4 l
Bore:
4.13 in / 105 mm
Stroke:
5 in / 127 mm
Net Power - 2,200 rpm - SAE J1349:
104 HP / 77.6 kW
Note:
Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269:
104 HP / 77.6 kW
Transmission
Drive Pumps:
1
Maximum Travel Speed - Forward:
5.6 mile/h / 9 km/h
Relief Valve Settings:
7033 psi / 48500 kPa
Maximum Travel Speed - Reverse:
6.2 mile/h / 10 km/h
Track Motors:
2
Weights
Operating Weight - XL:
20313 lb / 9214 kg
Operating Weight - LGP:
20992 lb / 9522 kg
Service Refill Capacities
Fuel Tank:
51.5 gal (US) / 195 l
Crankcase - With Filter:
2.91 gal (US) / 11 l
Final Drive - Each - XL:
2.6 gal (US) / 10 l
Cooling System:
5.92 gal (US) / 22.4 l
Final Drive - Each - LGP:
2.6 gal (US) / 10 l
Transmission - Hydraulic Tank:
15.7 gal (US) / 59.5 l
Hydraulic Controls
Pump Output:
17.7 gal/min / 68 l/min
Relief Valve Settings:
2988 psi / 20600 kPa
Undercarriage
Track Gauge - LGP, 762 mm (30 in):
73.2 in / 1860 mm
Length - Track on Ground - XL:
91 in / 2310 mm
Length - Track on Ground - LGP:
91 in / 2310 mm
Shoe Width - LGP:
26 in / 660 mm
Ground Pressure - XL:
5.6 psi / 38.6 kPa
Shoe Width - LGP, 762 mm (30 in):
30 in / 762 mm
Ground Contact Area - LGP:
4726 in² / 30492 cm²
Shoe Width - XL:
20 in / 510 mm
Ground Contact Area - XL:
3652 in² / 23562 cm²
Ground Pressure - LGP:
4.5 psi / 31.1 kPa
Track Gauge - LGP:
69 in / 1750 mm
Ground Contact Area - LGP, 762 mm (30 in):
5514 in² / 35574 cm²
Ground Pressure - LGP, 762 mm (30 in):
3.93 psi / 27.1 kPa
Track Gauge - XL:
63 in / 1600 mm
Ripper
Type:
Parallelogram
Number of Shanks:
3
Height:
6.5 in / 165 mm
Weight:
1222 lb / 554 kg
Overall Width:
67.3 in / 1710 mm
Maximum Reach - Ground Line:
21.9 in / 555 mm
Maximum Digging Depth:
13.3 in / 337.5 mm
Maximum Ground Clearance Under Tip:
17.6 in / 448 mm
Winch
Weight:
1345 lb / 610 kg
Winch Drive:
Hydrostatic
Control:
Hydraulic
Speed:
Variable
Drum Capacity - Optional Cable:
256 ft / 78 m
Winch Length:
27.76 in / 705 mm
Maximum Line Pull - Bare Drum:
40000 lb / 18144 kg
Throat Clearance:
6.75 in / 171.5 mm
Maximum Line Speed - Bare Drum:
131 ft/min / 40 m/min
Rope Diameter - Recommended:
0.63 in / 16 mm
Drum Diameter:
10 in / 254 mm
Overall Width:
29.2 in / 741 mm
Rope Diameter - Optional:
0.75 in / 19 mm
Maximum Line Speed - Full Drum:
207 ft/min / 63 m/min
Maximum Line Pull - Full Drum:
25000 lb / 11340 kg
Drum Capacity - Recommended Cable:
371 ft / 113 m
Drum Width:
10.8 in / 274 mm
Weights
Note:
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Cab
FOPS:
ISO 3449:2005 Level II
Dimensions
Ground Clearance - XL:
13 in / 332 mm
BLADE: Blade Width at Maximum Angle - Intermediate:
105.1 in / 2669 mm
Undercarriage
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage:
40
Dimensions
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in):
103.5 in / 2630 mm
BLADE: Blade Capacity (SAE) - Intermediate:
2.73 yd³ / 2.09 m³
BLADE: Blade Width at Maximum Angle - LGP:
115.8 in / 2940 mm
Width - Tractor - Standard Shoes - No Blade - XL:
83.1 in / 2110 mm
BLADE: Blade Height - Intermediate:
39.8 in / 1010 mm
Tractor Height - LGP:
109 in / 2769 mm
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in):
91 in / 2310 mm
Dimensions
Ground Clearance - LGP, 770 mm (30 in) Shoes:
13 in / 332 mm
BLADE: Blade Capacity (SAE) - LGP:
3.06 yd³ / 2.34 m³
BLADE: Blade Lift Height - XL:
30.2 in / 767 mm
Overall Length - With Blade - LGP:
169.1 in / 4309 mm
Track Gauge - LGP:
68.9 in / 1750 mm
BLADE: Blade Capacity (SAE) - XL:
2.86 yd³ / 2.19 m³
BLADE: Digging Depth - XL:
23.1 in / 586 mm
Track Gauge - LGP, 770 mm (30 in):
73.2 in / 1860 mm
Cab
Sound Levels - SAE J1166 FEB2008:
79 dB(A) / 79 dB(A)
Undercarriage
Number of Shoes - Each Side - SystemOne Undercarriage:
36
Dimensions
BLADE: Blade Width at Maximum Angle - XL:
103.8 in / 2636 mm
BLADE: Digging Depth - Intermediate:
22.5 in / 572 mm
Width - Tractor - Standard Shoes - No Blade - LGP:
94.9 in / 2410 mm
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank:
4.9 gal (US) / 19 l
Dimensions
BLADE: Blade Width - XL:
109.5 in / 2782 mm
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes:
169.1 in / 4309 mm
BLADE: Blade Lift Height - Intermediate:
30.2 in / 767 mm
Cab
Sound Levels - ISO 6396:2008:
79 dB(A) / 79 dB(A)
Dimensions
Tractor Height - LGP, 770 mm (30 in):
109 in / 2769 mm
BLADE: Maximum Tilt - XL:
15.8 in / 402 mm
BLADE: Digging Depth - LGP:
22.5 in / 572 mm
Length - Basic Tractor - Without Blade - LGP:
128.5 in / 3265 mm
Cab
ROPS:
ISO 6396:2008
Dimensions
BLADE: Blade Height - LGP:
39.8 in / 1010 mm
Tractor Height - XL:
109 in / 2769 mm
BLADE: Maximum Tilt - LGP:
17.6 in / 448 mm
BLADE: Blade Cutting Edge Angle, Adjustable - XL:
52° to 58°
Track Gauge - XL:
63 in / 1600 mm
Undercarriage
Number of Rollers - Each Side:
7
Dimensions
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes:
128.5 in / 3265 mm
Ground Clearance - LGP:
13 in / 332 mm
BLADE: Blade Lift Height - LGP:
30.2 in / 767 mm
BLADE: Blade Width - Intermediate:
115 in / 2921 mm
Length - Basic Tractor - Without Blade - XL:
128.5 in / 3265 mm
BLADE: Blade Height - XL:
42.2 in / 1073 mm
BLADE: Maximum Angle (either side) - LGP:
25°
Overall Length - With Blade - XL:
170.1 in / 4309 mm
Weights
Operating Weight - LGP, 762 mm/30 in:
21442 lb / 9726 kg
Dimensions
BLADE: Blade Cutting Edge Angle, Adjustable - LGP:
52° to 58°
BLADE: Maximum Tilt - Intermediate:
17.6 in / 448 mm
BLADE: Maximum Angle (either side) - Intermediate:
25°
BLADE: Maximum Angle (either side) - XL:
25°
BLADE: Blade Width - LGP:
126.7 in / 3220 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate:
52° to 58°
