
Request a Quote
993K Wheel Loader
- Standard Equipment
- Optional Equipment
- Specs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain filters
- Demand fan
- Driveline parking brake
- Engine, Cat C32 ACERT
- Fuel priming pump (electric)
- Ground level engine shutoff
- Precleaner, engine air intake (above hood)
- Radiator
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Rimpull Control System
- Transmission, planetary powershift, 3F/3R electronic control
- ELECTRICAL
- Alarm, back-up
- Alternator, 150-amp
- Batteries, maintenance free, 4 – 1,400 CCA
- Deutsch terminal connectors
- Diagnostic connector starting and charging system
- Electrical system, 24 volt
- Electronic Service Center
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway
- Starter and charging system, 24V
- Starter receptacle for emergency start
- Starter and transmission lockouts (bumper)
- OPERATOR ENVIRONMENT
- Advisor Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Air precleaner
- Cab, sound suppressed and pressurized, separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 10-amp) and power port
- Cigar lighter, ashtray
- Coat hook
- Controls, lift and tilt function
- Digital display on center console: – Gear – Ground speed – Machine hours
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Fuel level – Hydraulic oil temperature – Power train oil temperature – Tachometer
- Light, cab, dome
- Lunchbox, beverage and manual holders
- Mirrors, rearview (externally mounted)
- Rimpull Control System
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat, trainer with lap belt, 76 mm (3 in) wide
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- Transmission gear indicator
- Vital Information Management System (VIMS) with Advisor Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
- Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
- OTHER
- Automatic bucket leveler
- Automatic lift and lower bucket kickout
- Axle ecology drain
- Bumper service center
- Deluxe filtration
- Emergency platform egress
- Front walkway
- Fuel, fast fill system
- Grouped hydraulic pressure ports
- Guards, crankcase and power train
- Hitch, drawbar with pin
- Implement and steering ecology drains
- Implement lock lever, cab
- Linkage pins, maintenance free
- Oil sampling valves
- Positive Flow Control implement system
- Product Link™
- Rims
- Service center with ground level electrical and fluid connections
- Sight gauges for steering, implement and transmission oil
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering and transmission lock lever, cab
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- –50° C (–58° F) antifreeze
- Engine coolant heater (120V)
- Engine coolant heater (240V)
- ELECTRICAL
- LED warning strobe
- Object detection (radar)
- Power converter
- Rear vision camera
- OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Satellite Sirius radio with bluetooth
- Sun screen
- MACHINE CONTROL AND GUIDANCE
- Cat Terrain ready
- SPARE RIMS
- 40.00×51 spare rim
- MISCELLANEOUS ATTACHMENTS
- Axle oscillation limit stop
- Egress, powered rear access
- Rear roading fenders
Specs
Overview
Long Name:
993K Wheel Loader
Name:
993K
Brand:
Caterpillar
Status:
Current
Engine
Net Power:
973 HP / 726 kW
Operating Specifications
Operating Weight:
294687 lb / 133668 kg
Operating Weight - Tier 2 Equivalent*:
294687 lb / 133668 kg
Rated Payload - High Lift:
27.5 t / 24.9 t
Operating Weight*:
294687 lb / 133668 kg
Cat Truck Match - Standard Lift:
777
Operating Weight - Tier 4 Final*:
294687 lb / 133668 kg
Rated Payload - Standard Lift:
30 t / 27.2 t
Cat Truck Match - High Lift:
777, 785
Bucket Range:
12.2-23.7 m3 (16.0-31.0 yd3)
Articulation Angle:
43 ° / 43 °
Transmission
Transmission Type:
Cat Planetary Power Shift
Forward - 1:
4.2 mile/h / 6.8 km/h
Forward - 2:
7.4 mile/h / 11.9 km/h
Forward - 3:
12.7 mile/h / 20.5 km/h
Reverse - 1:
4.7 mile/h / 7.5 km/h
Reverse - 2:
8.1 mile/h / 13.1 km/h
Reverse - 3:
13.9 mile/h / 22.5 km/h
Direct Drive - Reverse 3:
15.6 mile/h / 25.2 km/h
Direct Drive - Reverse 1:
4.9 mile/h / 8 km/h
Direct Drive - Reverse 2:
8.8 mile/h / 14.2 km/h
Direct Drive - Forward 3:
14.1 mile/h / 22.8 km/h
Direct Drive - Forward 2:
8 mile/h / 13 km/h
Direct Drive - Forward 1:
Lock-up disabled
Hydraulic System - Lift/Tilt
Lift/Tilt System - Pump:
Variable Piston
Cylinders - Lift/Tilt:
Double-acting
Relief Valve Setting - Lift/Tilt:
4200 psi / 29500 kPa
Maximum Flow at 1,650 rpm:
311 gal/min / 1180 l/min
Tilt Cylinder - Bore:
9.3 in / 235 mm
Lift Cylinder - Bore:
10.5 in / 267 mm
Lift/Tilt System - Circuit:
Positive Flow Control
Lift Cylinder - Stroke:
66.2 in / 1682 mm
Tilt Cylinder - Stroke:
40.9 in / 1040 mm
Hydraulic Cycle Times
Lower:
3.8 s / 3.8 s
Rack Back:
2.4 s / 2.4 s
Lower Float Down:
3.1 s / 3.1 s
Total Hydraulic Cycle Time:
17.2 s / 17.2 s
Dump:
1.8 s / 1.8 s
Raise:
9.2 s / 9.2 s
Service Refill Capacities
Fuel Tank:
573.3 gal (US) / 2170 l
Cooling System:
80.2 gal (US) / 303.5 l
Crankcase:
31.7 gal (US) / 120 l
Transmission:
52 gal (US) / 196.9 l
Hydraulic System - Tank Only:
146 gal (US) / 553 l
Differential - Final Drives - Front:
127.3 gal (US) / 482 l
Differential - Final Drives - Rear:
127.3 gal (US) / 482 l
Hydraulic System Factory Fill:
230 gal (US) / 873 l
Buckets
Bucket Capacities:
12.2-23.7 m3 (16.0-31.0 yd3)
Axles
Front:
Fixed
Rear:
Trunnion
Oscillation Angle:
10 degrees
Hydraulic System - Steering
Total Steering Angle:
86 ° / 86 °
Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi):
133 gal/min / 505 l/min
Relief Valve Setting - Steering:
5000 psi / 34500 kPa
Steering System - Circuit:
Closed
Steering System - Pump:
Piston, variable displacement
Engine - Tier 4 Final
Stroke:
6.4 in / 162 mm
Displacement:
1959 in³ / 32.1 l
Peak Torque - 1,250 rpm:
4034 lb/ft / 5470 N·m
Net Power - EEC 80/1269:
973 HP / 726 kW
Net Power - SAE J1349:
964 HP / 719 kW
Gross Power - SAE J1995:
1039 HP / 775 kW
Bore:
5.7 in / 145 mm
Rated Speed:
1800 r/min / 1800 r/min
Net Power - ISO 9249:
973 HP / 726 kW
Torque Rise:
33%
Net Power - ISO 14396:
1024 HP / 764 kW
Emissions:
U.S. EPA Tier 4 Final
Engine Model:
Cat® C32 with ACERT™ Technology
Engine - Tier 2 Equivalent
Stroke:
6.4 in / 162 mm
Gross Power - SAE J1995:
1041 HP / 777 kW
Peak Torque - 1,250 rpm:
4034 ft-lb / 5470 N·m
Net Power - EEC 80/1269:
973 HP / 726 kW
Bore:
5.7 in / 145 mm
Net Power - ISO 14396:
1024 HP / 764 kW
Rated Speed:
1800 r/min / 1800 r/min
Net Power - ISO 9249:
973 HP / 726 kW
Displacement:
1959 in³ / 32.1 l
Net Power - SAE J1349:
964 HP / 719 kW
Emissions:
U.S. EPA Tier 2 Equivalent
Torque Rise:
33%
Engine Model:
Cat C32 with ACERT Technology
Sound
Operator Sound Pressure - ANSI/SAE J1166 FEB08:
72 dB(A) / 72 dB(A)
Dynamic Operator Sound Pressure Level (ISO 6396:2008):
70 dB(A) / 70 dB(A)
Note (1):
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
Engine - Tier 2 Equivalent
Note:
Standard ambient cooling.
Hydraulic System - Lift/Tilt
Note:
High Lift configuration.
Sound
Note (3):
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operating Specifications
Note:
* High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).
Sound
Note (2):
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Service Refill Capacities
Note:
High Lift configuration.
Hydraulic Cycle Times
Note:
High Lift configuration, calculated speeds.
Transmission
Note:
50/65-51 BFOR (311-1938), calculated speeds.
Engine - Tier 4 Final
Note:
Standard ambient cooling.