Standard Equipment

• ELECTRICAL
  • Alternator, 150 amp
  • Back up alarm
  • Batteries, 12-volt (4), 200 amp-hour
  • Converters, 12-volt, 10 amp and 20 amp
  • Diagnostic connector
  • Horn, forward warning
  • Lights, engine compartment
  • Lighting system, five (5) HID/seven (7) Halogen
  • Starting receptacle
• OPERATOR ENVIRONMENT
  • Advisor-electronic monitoring system
  • Air conditioner and heater
  • Armrest, adjustable
  • Cab, FOPS
  • Deactivation switch, hydraulic controls
  • Decelerator, pedal
  • Finger Tip Control (FTC) steering
  • Governor switch, electronic
  • Hydraulic system: – Electronically controlled for bulldozer and ripper control
  • Mirror, rearview
  • Radio ready, entertainment
  • ROPS rollbar
  • Seat belt, retractable 76 mm (3 in)
  • Seat, cloth, air suspension
  • Wipers, intermittent, low and high speeds
• POWER TRAIN
  • Cat C32
  • Aftercoolers, air-to-air
  • Air filters, dual with precleaner
  • Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG
  • Controlled throttle shifting
  • Coolant, extended life
  • Shift management
  • Engine Idle Shutdown Timer
  • Engine precleaner
  • Ether starting aid, automatic
  • Four planet, double-reduction planetary final drives
  • Fuel priming pump, electric
  • High speed oil changing system
  • Hydraulic demand fan
  • Copper Grommetted Tube Radiator - Serial number prefix JEL and JNS
  • Mufflers, dual
  • Parking brake, electronic
  • Prescreener
  • Separator, water/fuel
  • Thermal shields
  • Torque divider
  • Transmission, powershift: – (3F/3R speeds)
• TECHNOLOGY
  • Auto blade assist
  • Enhanced auto shift
  • Product Link (satellite)
  • VIMS 3G
• UNDERCARRIAGE
  • Equalizer bar end pin grease fittings, remote
  • Rollers and idlers, lifetime lubricated
  • Sprocket rim segments, replaceable
  • Suspension-type undercarriage, eight-roller tubular track roller frame
  • Three bolt idler and roller caps
  • Track adjusters, hydraulic
  • Track guides
  • Two-piece master links
• SAFETY AND SECURITY
  • Anchorage points
  • Fender guard rails
  • Heavy duty steps and handles
  • Operator not present monitoring system
  • Slope and side-slope monitor
• OTHER STANDARD EQUIPMENT
  • Bottom guards
  • CD ROM parts book
  • Dual-tilt blade control
  • Ecology drains
  • Engine enclosure
  • Fluid sampling ports
  • Grade control ready
  • Ground level service center
  • Ripper Hydraulics
  • Vandalism, protection (8 caplocks)

Optional Equipment

• GUARDS
  • Bottom guards, sealed
  • Bottom guards, partial
  • Guard, undercarriage idlers
  • Screens, grill door
• OPERATOR STATION
  • Air conditioner: – Fender – ROPS
  • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
  • Heated and ventilated seat
  • Operator arrangement: – 5th percentile arrangement – Quick opening
  • Powered precleaner
  • Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors
  • Window shades
• POWER TRAIN
  • Engine coolant, arctic
  • Engine precleaner, turbine
  • Engine prelube
  • Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)
  • Final drives: – Clamshell guard
  • High altitude arrangement (Not available on D11T Carrydozer.)
  • Copper Grommetted Tube Radiator - Serial number prefix AMA and MDG
  • Remote power train and engine high speed oil change system located at the ground level service center
• UNDERCARRIAGE
  • Carrier rollers
  • Carrier rollers – cold weather
  • Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service trapezoidal hole (Not available on D11T Carrydozer.) – 810 mm (32 in) Extreme Service – 810 mm (32 in) Extreme Service abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole – 810 mm (32 in) Extreme Service tall links – 810 mm (32 in) Extreme Service tall links abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole tall links – 915 mm (36 in) Extreme Service clipped – 915 mm (36 in) Extreme Service clipped abrasion resistant material – 915 mm (36 in) Extreme Service clipped trapezoidal hole – 915 mm (36 in) Extreme Service clipped tall links
  • Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound
• BULLDOZER ATTACHMENTS
  • 11CD Abrasion resistant blade
  • 11CD No wear plate
  • 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)
  • 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)
  • 11SU No wear plate (Not available on D11T Carrydozer.)
  • 11U Abrasion resistant blade (Not available on D11T Carrydozer.)
  • 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)
  • 11U No wear plate (Not available on D11T Carrydozer.)
• REAR ATTACHMENTS
  • Counterweight, rear
  • CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep
  • Drawbar, rear (Not available on D11T Carrydozer.)
  • Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
  • Ripper lube
  • Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
• TECHNOLOGY
  • Command for Dozing (Installed by dealer.)
  • Machine control, performance: – AutoCarry – Automatic ripper control
  • Terrain for Grading: – With blade control
• SAFETY AND SECURITY
  • Access arrangement (ladder and platform)
  • Fuel tank: – Platform ready – Extra capacity
  • Lights: – LED – LED, high intensity – Warning, strobe
  • Powered access ladder
  • Rear access platform
• OTHER ATTACHMENTS
  • Automatic lubrication system
  • Grease points, grouped
  • Heater, engine coolant
  • Heater, fuel
  • Hydraulic lines, AutoCarry
  • Hydraulic lines, screens
  • Hydraulic lines, screens and AutoCarry

Specs