Request a Quote
816K – 2015, Tier 4 Final, Stage IV
- Standard Equipment
- Optional Equipment
- Specs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- Advanced Productivity Electronic Control Shifting (APECS)
- Air to air aftercooler
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV only)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
- Engine driven cooling fan (suction)
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, unit core
- Starting aid (ether)
- Throttle lock
- Transmission, planetary with 2F/2R speed range control
- Torque converter
- ELECTRICAL
- Alarm, back-up
- Alternator (150 amp)
- Batteries, maintenance free
- Electrical system (24 volt)
- Ground level lockable master disconnect switch
- Light, warning unswitched (LED strobe)
- Lighting system (front and rear)
- Starter, electric
- Starting receptacle for emergency start
- OPERATOR ENVIRONMENT
- 12-volt power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner with roof mounted condenser
- Cab, sound-suppressed pressurized
- Camera, rear vision
- Coat and hard hat hooks
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Hydraulic controls – floor mounted
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque convertor temperature
- Instrumentation, warning indicators: – Action alert system, three category – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Internal four-post rollover protective structure (ROPS/FOPS)
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Radio, CB ready
- Radio ready for entertainment: – Antenna – Speakers – Converter (12-volt 10-15 amp)
- Seat belt with minder, retractable, 76 mm (3") wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
- GUARDS
- Guards, axle (front and rear)
- Guard, cab window
- Guards, crankcase and power train, hinged
- Guard, driveshaft
- Guard, radiator
- Striker bars
- FLUIDS
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
- OTHER STANDARD EQUIPMENT
- DEF tank fill gauge (Tier 4 Final/Stage IV only)
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Emergency egress
- Fire suppression ready
- Fuel tank, 500 L (132 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Steering, load sensing
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
- STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
- Glass (window): – Standard bonded or rubber-mounted glass
- Horn group (standard)
- Horn group (trumpet)
- Lights – cab: – Standard or LED
- Mirrors – cab: – Standard or heated
- Precleaner – cab: – Standard or powered
- Seat – cab: – Standard or heated and ventilated
- STANDARD ATTACHMENTS – POWER TRAIN
- Axles: – Axle arrangement (no spin front) – Axle arrangement (no spin rear) – Axle arrangement (no spin front and rear)
- STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
- Engine precleaners: – Turbine or dual stage
- STANDARD ATTACHMENTS – BLADES
- Dozer Arrangement – Standard (No Blade)
- Dozer Arrangement – Straight Blade
- Dozer Arrangement – Tilt (No Blade)
- STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
- Product Link: – GSM, satellite
- STANDARD ATTACHMENTS – WHEELS AND CLEANER BARS
- Wheels and tips: – Wheel arrangement (6.25" plus tip) – Wheel arrangement (6.25" paddle tip) – Wheel arrangement (6.25" plus and paddle) – Wheels, chopper
- Bar group – cleaner (cleaner fingers and striker bar)
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPERATOR ENVIRONMENT
- Radio, AM/FM/AUX/USB/BLUETOOTH
- FLUIDS
- Antifreeze, –50° C (–58° F)
- SPECIAL ARRANGEMENTS
- Engine: – Sound suppression
- STARTING AIDS
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- MISCELLANEOUS
- Film (ANSI) (Tier 4 Final/Stage IV only)
- EU certification (Tier 4 Final/Stage IV only)
- Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
Specs
Overview
Long Name:
816K Landfill Compactor
Name:
816K
Brand:
Caterpillar
Status:
Current
Engine
Gross Power:
284 HP / 212 kW
Net Power:
248 HP / 185 kW
Engine Model:
Cat® C7.1: configured for two emissions options
Bore:
4.1 in / 105 mm
Stroke:
5.3 in / 135 mm
Displacement:
427.8 in³ / 7.01 l
High Idle Speed:
2270 r/min / 2270 r/min
Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent:
249 HP / 186 kW
Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV:
899 lb/ft / 1219 N·m
Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV:
248 HP / 185 kW
Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent:
249 HP / 186 kW
Gross Power - ISO 14396 - Tier 4 Final/Stage IV:
274 HP / 204 kW
Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent:
286 HP / 213 kW
Rated Power (SAE J1349) - Tier 4 Final/Stage IV:
248 HP / 185 kW
Gross Power - SAE J1995 - Tier 4 Final/Stage IV:
284 HP / 212 kW
Low Idle Speed:
800 r/min / 800 r/min
Emissions:
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Transmission
Travel Speeds - Forward - Second:
6.8 mile/h / 10.9 km/h
Travel Speeds - Reverse - First:
4.3 mile/h / 7 km/h
Transmission Type:
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
Travel Speeds - Forward - First:
3.8 mile/h / 6.1 km/h
Travel Speeds - Reverse - Second:
7.8 mile/h / 12.5 km/h
Hydraulic System
Pump Flow at 2,111 rpm:
23.5 gal/min / 89 l/min
Maximum Supply Pressure:
2930 psi / 20200 kPa
Cylinders, Double Acting - Lift, Bore and Stroke:
120 mm × 915 mm (4.7 in × 36.0 in)
Main Relief Pressure:
3190 psi / 22000 kPa
Axles
Front:
Planetary – Fixed
Rear:
Planetary – Oscillating
Oscillation Angle:
±6°
Braking System
Parking Brake:
Drum and Shoe, Spring Applied, Hydraulic Released
Service Refill Capacities
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only):
4.2 gal (US) / 16 l
Differential - Final Drives - Rear:
11.4 gal (US) / 43 l
Engine Crankcase:
5.28 gal (US) / 20 l
Fuel Tank:
132.1 gal (US) / 500 l
Differential - Final Drives - Front:
11.4 gal (US) / 43 l
Hydraulic Tank Only:
19.8 gal (US) / 75 l
Transmission:
14.8 gal (US) / 56 l
Cooling System - Tier 4 Final/Stage IV:
21.4 gal (US) / 81 l
Weights
Operating Weight:
56899 lb / 25809 kg
Cab - Standard
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent:
112 dB(A) / 112 dB(A)
Cab - Suppression
Operator Sound Level - ISO 6396:
70 dB(A) / 70 dB(A)
Cab - Standard
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV:
111 dB(A) / 111 dB(A)
Operator Sound Level - ISO 6396:
71 dB(A) / 71 dB(A)
Operating Specifications
Maximum Operating Weight (Tier 4 Final/Stage IV):
56899 lb / 25809 kg
Maximum Operating Weight (Tier 3/Stage IIIA equivalent):
56308 lb / 25541 kg
Dimensions (Approximate)
Height - Top of Exhaust Pipe:
11.5 ft / 3497 mm
Height - Top of Hood:
8.9 ft / 2720 mm
Ground Clearance - Bumper:
2.7 ft / 818 mm
Hitch to Centerline of Front Axle:
5.5 ft / 1675 mm
Wheel Base:
11 ft / 3350 mm
Width - Over Wheels:
131.4 ft / 3338 mm
Overall Length - Maximum:
26.4 ft / 8058 mm
Outside Turning Radius - Blade:
21.2 ft / 6473 mm
Height - Cab Roof:
12.7 ft / 3878 mm
Height - Top of Beacon:
14.3 ft / 4368 mm
Inside Turn Radius - Wheels:
8.9 ft / 2700 mm
Inside Turn Radius - Blade:
9.5 ft / 2910 mm
Centerline of Rear Axle to Bumper:
6.5 ft / 1990 mm
Ground Clearance:
1.7 ft / 516 mm
Hydraulic System - Steering
Bore:
4 in / 101.6 mm
Steering Pressure Limited:
4003 psi / 27600 kPa
Vehicle Articulation Angle:
84 ° / 84 °
Stroke:
23.5 in / 597 mm
Steering System - Pump:
Piston – Variable Displacement
Steering System - Circuit:
Closed Center Load Sensing
Maximum System Flow:
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Engine
Torque Rise:
52 % / 52 %
Wheels
Paddle Tips - Tip Height:
6.25 in / 159 mm
Engine
Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent:
749 lb/ft / 1016 N·m
Wheels
Paddle Tips - Drum Diameter:
55.1 in / 1400 mm
Paddle Tips - Width over Drums:
131.4 in / 3338 mm
Paddle Tips - Outside Diameter:
67.6 in / 1717 mm
Plus Tips - Outside Diameter:
67.6 in / 1717 mm
Plus Tips - Drum Width:
40 in / 1016 mm
Blades
Width - Moldboard Length:
11.75 ft / 3580 mm
Wheels
Combo Wheels - Replaceable:
Welded
Plus Tips - Tips per Row:
5
Plus Tips - Drum Diameter:
55.1 in / 1400 mm
Combo Wheels - Weight (Group):
13554 lb / 6148 kg
Combo Wheels - Outside Diameter:
67.6 in / 1717 mm
Cab - Suppression
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent:
110 dB(A) / 110 dB(A)
Blades
Maximum Lift Above Ground:
3.7 ft / 1140 mm
Height - Including Cutting Edge and Screen:
6.4 ft / 1961 mm
Wheels
Paddle Tips - Weight (Group):
13126 lb / 5954 kg
Paddle Tips - Tips per Row:
5
Combo Wheels - Tips per Wheel:
20
Plus Tips - Replaceable:
Welded
Engine
Maximum Altitude - Without Derating:
9842.52 ft / 3000 m
Wheels
Combo Wheels - Drum Diameter:
55.1 in / 1400 mm
Paddle Tips - Drum Width:
40 in / 1016 mm
Plus Tips - Width over Drums:
131.4 in / 3338 mm
Plus Tips - Tip Height:
6.25 in / 159 mm
Cab - Suppression
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV:
109 dB(A) / 109 dB(A)
Wheels
Combo Wheels - Drum Width:
40 in / 1016 mm
Blades
Width - Over End Bits:
12 ft / 3656 mm
Wheels
Combo Wheels - Tip Height:
6.25 in / 159 mm
Plus Tips - Weight (Group):
13982 lb / 6342 kg
Engine
Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent:
275 HP / 205 kW
Blades
Maximum Depth of Cut:
1.2 ft / 362 mm
Wheels
Paddle Tips - Tips per Wheel:
20
Plus Tips - Tips per Wheel:
20
Service Refill Capacities
Cooling System - Tier 3/Stage IIIA Equivalent:
19.3 gal (US) / 73 l
Wheels
Combo Wheels - Width over Drums:
131.4 in / 3338 mm
Combo Wheels - Tips per Row:
5
Paddle Tips - Replaceable:
Welded
Service Refill Capacities
Note:
All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.
