The new electric rope shovels from CAT® are designed with reliability and safety in mind, and the 7395 Electric Rope Shovel is no exception. With this electric rope shovel, you’ll enjoy added safety with industry-leading cab visibility. And, with optimal pass match capability with CAT mining trucks, you’ll enjoy added productivity on the job site. Best of all, the 7395 Electric Rope Shovel allows for the lowest cost per ton of any loading tool available. This one-of-a-kind electric rope shovel is a must-have for any mining site, and the experts at Wagner Equipment, your premier CAT dealer, are here to help you determine if it’s right for you. Contact us today.
Request a Quote
7395 Electric Rope Shovel
70 t / 64 t
20.6-55.8 m3 (27-73 yd3)
Dependent on application and material density.
Working Weight - With Dipper and Standard Links:
2652000 lb / 1202927 kg
Ballast - Furnished By Customer:
574000 lb / 260362 kg
These weights will vary slightly depending upon dipper and optional equipment selection.
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Ground Bearing Pressure - 274.3 cm (108 in) Treads:
43 psi / 296 kPa
Dual-motor independent drive.
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard:
32.75 ft / 10 m
Ground Bearing Pressure - Total Effective Bearing Area (2):
442 ft² / 41 m²
Ground Bearing Pressure:
Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - Total Effective Bearing Area (1):
343 ft² / 32 m²
Upper Works Overall Width - Including Standard Walkways:
44.25 ft / 13.5 m
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads:
34.75 ft / 10.6 m
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard:
54 psi / 371 kPa
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Optimal Working Ranges*
Cutting Height - Maximum:
48.75 ft / 14.9 m
Dumping Height - With Clearance to Open Dipper Door:
30.84 ft / 9.4 m
Cutting Radius - Maximum:
74.75 ft / 22.8 m
Radius of Level Floor:
52.49 ft / 16 m
Revolving Frame Tail Swing Radius:
30.51 ft / 9.3 m
Optimal working ranges based on loading a Cat® 793F truck.
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Automatic, single-line system for open gear lubricant and grease.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
IGBT Acutrol drive system.
Power Requirements - Peak power:
4165 HP / 3106 kW
Power Requirements - Voltage:
3 phase, 50/60 Hz, 7,200V
Power Requirements - Average Power Demand:
777-1087 kW (1,042-1,458 hp)
Power Requirements - 60 Hz:
Power Requirements - 50 Hz:
6,000V, 6,600V, 7,200V, 11,000V
Other voltages available to suit customer requirements.
Rope Data - Crowd - Diameter:
2.5 in / 64 mm
Rope Data - Dipper Trip - Diameter:
0.625 in / 16 mm
Rope Data - Hoist - Diameter:
2.75 in / 70 mm
Rope Data - Boom Suspension - Diameter:
3.25 in / 83 mm
Rope Data - Crowd - No.:
Rope Data - Retract - No.:
Rope Data - Dipper Trip - No.:
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Boom Suspension - No.:
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Hoist - No.:
Rope Data - Retract - Diameter:
2.5 in / 64 mm
High impact ropes available as an option
External fast fill from lower level.