Request a Quote

  • This field is for validation purposes and should be left unchanged.

PM825

The PM825 is a high-production, half-lane milling machine with a cutting width of 2505 mm (98.6 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
  • Standard Equipment
  • Optional Equipment
  • Specs

Standard Equipment

  • OPERATOR ENVIRONMENT
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • CAT CONNECT TECHNOLOGY
    • Cat Product Link
    • Cat GRADE
  • CONVEYOR
    • Grease tensioner
    • Material removal boost feature
  • ROTOR SYSTEM
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • POWERTRAIN
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • HYDRAULIC SYSTEM
    • Dual pump hydraulic propel system
    • Traction control
  • SERVICE AND MAINTENANCE
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • SAFETY AND SECURITY
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights

Optional Equipment

  • OPERATOR ENVIRONMENT
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • CAT CONNECT TECHNOLOGY
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • CONVEYOR
    • Dust abatement system
    • Remote camera (loading conveyor)
  • ROTOR SYSTEM
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • POWERTRAIN
    • CE certificate
  • HYDRAULIC SYSTEM
    • Water tank transfer pump
    • Fuel transfer pump
  • SERVICE AND MAINTENANCE
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • SAFETY AND SECURITY
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)

Specs

Overview

Long Name:
PM825 Cold Planer
Name:
PM825
Brand:
Caterpillar
Status:
Current

Cutting System

Milling Width:
98.6 in / 2505 mm

Power Train

Rated Power:
800.6 HP / 597 kW

Weights

Operating Weight:
82673 lb / 37500 kg

Cutting System

Maximum Milling Depth:
13 in / 330 mm
Rotor Speeds:
100 / 109 / 118 rpm
Number of Bits:
203

Power Train

Engine:
Cat C18 twin-turbo
Maximum Travel Speed:
3.7 mile/h / 5.9 km/h
Maximum Milling Speed:
328 ft/min / 100 m/min

Dimensions

Operating Length - Conveyor Up:
47.64 ft / 14.52 m
Operating Width:
11.02 ft / 3.36 m
Height - Canopy:
13.29 ft / 4.05 m
Maximum Truck Clearance:
15.94 ft / 4.86 m
Minimum Right Cutting Radius:
4.92 ft / 1.5 m
Minimum Left Cutting Radius:
6.56 ft / 2 m
Conveyor Swing:
60 degrees from center
Transport Length:
40.78 ft / 12.43 m
Transport Width:
9.88 ft / 3.01 m
Transport Height:
9.84 ft / 3 m

Weights

Transport Weight:
74075 lb / 33600 kg

Service Refill Capacities

Water Spray System Tank:
898.2 gal (US) / 3400 l
Cooling System:
27.5 gal (US) / 104 l
Fuel Tank:
292.7 gal (US) / 1108 l
Engine Oil:
17.2 gal (US) / 65 l
Hydraulic Tank:
29.9 gal (US) / 113 l