TH0842
TH0842 Telehandler
The Next Generation Cat® TH0842 Telehandler, with its maximum lift height of 12.8m/42.1ft and maximum forward reach of 8.4m/27.6ft, helps you complete all your lifting and material handling needs. Operate this telescopic handler with confidence by utilizing the pilot controlled joystick. Thanks to the extended service intervals, you have more time for the work that matters.
TH0842
The Next Generation Cat® TH0842 Telehandler is focused on safety and ease of operation, with extended service intervals so it is ready to work when you are.
More than a machine – Cat Telehandlers are an extension of you.
More than a machine – Cat Telehandlers are an extension of you.
- Specifications
- Standard / Optional Features
- Long Name -TH0842 Telehandler
- Name -TH0842
- Brand -Cat
- Status -Current
- Model - Cat C3.6
- Emissions - Meets U.S. EPA Tier 4 Final/EU Stage V emissions standards.
- Gross Power - ISO 14396:2002
- Gross Power - 74 hp / 55 kW
- Displacement - 220 in³ / 3.6 l
- Model* - Cat C3.6
- Emissions - Meets U.S. EPA Tier 4 Final/EU Stage V emissions standards.
- Gross Power - ISO 14396:2002
- Gross Power - 115 hp / 86 kW
- Displacement - 220 in³ / 3.6 l
- Rated Load Capacity - 8000 lb / 3629 kg
- Maximum Lift Height - 42.1 ft / 12.8 m
- Maximum Forward Reach - 27.6 ft / 8.4 m
- Frame Leveling - 10 degrees
- Drawbar Pull - Loaded - 29179 lbf / 129.8 kN
- Capacity at Maximum Height - 6000 lb / 2722 kg
- Capacity at Maximum Reach - 1700 lb / 771 kg
- Operating Weight - 23366 lb / 10599 kg
- Maximum Ground Bearing Pressure (Solid Tires) - 185 psi / 1276 kPa
- Maximum Ground Bearing Pressure (Pneumatic Tires) - 150 psi / 1034 kPa
- Travel Speed – Forward - 20 mile/h / 31 km/h
- Travel Speed – Reverse - 14 mile/h / 22 km/h
- Turning Radius over Tires (2-wheel steer) - 261 in / 6.64 m
- Turning Radius over Tires (4-wheel steer) - 156 in / 3.97 m
- Note - Operating Specifications, and Dimensions are based on 55 kW (74 hp) engine, pnuematic tires, open canopy, 1829 mm (72 in) standard carriage, 1829 mm (72 in) forks, full fluids, and 80 kg (176 lb) operator.
- Note (1) - Travel Speeds and Drawbar Pull are based on the 86 kW (115 hp) engine.
- Engine* - 194 kg / 88 kg
- Enclosed Cab (with Air Conditioning) - 364 lb / 165 kg
- Solid Tires - 1737 lb / 788 kg
- Fenders (set of 4) - 119 lb / 54 kg
- Note - * 86 kW (115 hp) Engine
- Auxiliary Hydraulic Flow - 14.5 gpm / 55 L/min
- Auxiliary Hydraulic Pressure - 4061 psi / 280 bar
- Maximum Pump Flow - 37 gpm / 141 L/min
- System Operating Pressure - 4061 psi / 280 bar
- Fuel Tank - 39 gal (US) / 146 l
- Diesel Exhaust Fluid (DEF) Tank - 5 gal (US) / 19 l
- Hydraulic Tank - 24 gal (US) / 90 l
- Hydraulic System - 44 gal (US) / 165 l
- Engine Crankcase - 2.4 gal (US) / 9 l
- Transmission - 5.3 gal (US) / 20 l
- Transfer Case - 0.7 gal (US) / 2.7 l
- Note - Diesel Exhaust Fluid (DEF) is only applicable for 86 kW (115 hp) engine option.
- Forward - 4 Gears
- Reverse - 3 Gears
- Option (1) - 14-24 Galaxy Giraffe XLW L-2 (Air)
- Option (2) - 13-24 Camso TLH 792S (Solid)
- Option (3) - 13-24 Maxam MS709 (Solid)
- Service Brakes - Inboard wet disc brakes on front and rear axles
- Parking Brakes - Wet disc, spring applied hydraulic release (front axle)
- Boom Down - 14.2 sec
- Boom Up - 12.8 sec
- Tele In - 13.3 sec
- Tele Out - 14.2 sec
- Height - Machine Rear - 102 in / 2.59 m
- Overall Length to Front of Carriage - 232 in / 5.89 m
- Overall Width - Standard Tires - 93 in / 2.36 m
- Wheel Base - 131 in / 3.32 m
- Ground Clearance - 19 in / 473 mm
- Air Conditioning - The air conditioning system on this machine contains 0.68 kg (1.5 lb) of refrigerant. The refrigerant is either R134a or R1234yf. If equipped with R134a (Global Warming Potential = 1430), the refrigerant in the system has a CO2 equivalent of 0.972 metric tonnes (1.07 tons).
- Recyclability - 97%
- Exterior Sound - 82 dB(A)
- Operator Sound - 79 dB(A) / 79 dB(A)
Standard Equipment
- engine
- 55 kW (74 hp)
- cold weather
- Battery disconnect with lockout feature
- operator station
- Canopy
- operating enhancers
- Operator Presence Seat Switch
- Camera, rearview
- Load Stability Indicator (LSI)
- operator seat
- Seat – Mechanical Suspension
- seat belt
- Seat belt – 51 mm (2 in)
- operator station accessories
- USB dual charging port (USB-A and USB-C)
- Security, 4 digit operator code enabled
- Wiper, front (enclosed cab only)
- fenders
- Cab fender (Left Hand front)
- other options
- Frame cover
- Retrieval hitch
- lights
- LED work lights – cab, boom
- telematics
- PLE643 – Product Link™ Elite
- attachment coupler
- TH Coupler (Manual)
- auxiliary hydraulic connections
- Capped auxiliary hydraulic lines
Optional Equipment
- engine
- 86 kW (115 hp)
- cold weather
- Cold Weather Package
- Dual Battery, heavy duty
- Engine Block Heater
- Ether Starting Aid
- operator station
- Enclosed Cab, heat
- Enclosed Cab, heat, air conditioner
- operator seat
- Seat – Mechanical Suspension Plus
- seat belt
- Seat belt – 75 mm (3 in)
- Seat belt with Indicator – 75 mm (3 in)
- operator station accessories
- Security, Bluetooth® key
- Hydraulic lockout switch
- Wiper, rear (enclosed cab only)
- Wiper, roof (enclosed cab only)
- Sunshade (top window)
- Padlocks (set of 4)
- fenders
- Fenders (4 Wheels)
- guarding
- Window guard, front
- Window guard, top
- other options
- Boom prop
- lights
- Beacon
- Roading lights
- tires
- Galaxy – pneumatic directional
- Camso – solid directional
- Maxam – solid non-directional
- attachment coupler
- IT Coupler (Manual)
- IT Coupler (Hydraulic)
- auxiliary hydraulic connections
- Twist to connect hydraulic quick disconnects
- carriage
- Standard – 1270 mm (50 in)
- Standard – 1829 mm (72 in)
- Side Tilt/Rotating – 1270 mm (50 in)
- Side Tilt/Rotating – 1829 mm (72 in)
- Hydraulic Fork Positioner – 1829 mm (72 in)
- forks
- Pallet Forks – 1220 mm (48 in)
- Pallet Forks – 1525 mm (60 in)
- Pallet Forks – 1829 mm (72 in)
- other work tool attachments
- General Purpose Bucket
- Truss Boom – 3.7 m (12 ft)