C15
Cat?� C15 Industrial Diesel Engine
C15
On construction sites and mining operations, in agriculture and forestry, and in a wide range of industries, Cat?� C15 Industrial Diesel Engines deliver the power, performance and durability to take on the biggest challenges. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat?� industrial engine. Industries and applications powered by C15 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers. C15 engines, with ratings: 328-444 bkW (440-595 bhp) @ 1800-2100 rpm, meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
The Cat?� C15 Industrial Diesel Engine is offered in ratings ranging from 328-444 bkW (440-595 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C15 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Industrial Power
- Specifications
- Standard / Optional Features
- Long Name -Cat<sup>?�</sup> C15 Industrial Diesel Engine
- Name -C15
- Brand -Caterpillar
- Status -Current
- Maximum Power - 595 hp / 444 kW
- Maximum Torque - 2004 lb-ft @ 1400 rpm / 2717 Nm @ 1400 rpm
- Rated Speed - 1800-2100 rpm
- Minimum Power - 440 hp / 328 kW
- Emissions - China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Engine Configuration - Inline 6, 4-Stroke-Cycle Diesel
- Bore - 5.4 in / 137 mm
- Stroke - 6.8 in / 171 mm
- Displacement - 927.6 in³ / 15.2 l
- Compression Ratio - 18.0:1
- Aspiration - Turbocharged Aftercooled (TA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
- Length - 54.2 in / 1377 mm
- Width - 36.2 in / 919 mm
- Height - 48.3 in / 1226 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 3239 lb / 1469 kg
Standard Equipment
- air inlet system
- Turbocharged
- Air-to-Air Aftercooled
- control system
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
- cooling system
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- exhaust system
- Exhaust manifold, dry
- Optional exhaust outlet
- flywheels and flywheel housing
- SAE No. 1 flywheel housing
- fuel system
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
- lube system
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
- general
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request