335
335 Hydraulic Excavator
Cat® 335 hydraulic excavators offer a compact radius design for the ideal balance of control, digging, trenching, and lifting capacity at lower hourly operating costs.
335
The Cat® 335 Excavator delivers powerful performance in a compact radius design for heavy construction, roadwork, earthmoving, and truck loading. This 35-ton machine features smart technology, an ergonomic cab, long maintenance intervals, fuel efficiency, and high uptime.
- Specifications
- Standard / Optional Features
- Long Name -335 Hydraulic Excavator
- Name -335
- Brand -Caterpillar
- Status -Current
- Net Power - ISO 9249 - 273 hp / 203.7 kW
- Net Power - ISO 9249 (DIN) - 277 hp (metric) / 277 hp (metric)
- Engine Model - Cat® C7.1
- Engine Power - ISO 14396 - 275 hp / 205 kW
- Engine Power - ISO 14396 (DIN) - 279 hp (metric) / 279 hp (metric)
- Bore - 4 in / 105 mm
- Stroke - 5 in / 135 mm
- Displacement - 428 in³ / 7.01 l
- Biodiesel Capability - Up to B20¹
- Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
- Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
- Main System - Maximum Flow - 560 l/min (148 gal/min)
- Maximum Pressure - Equipment - 5075 psi / 35000 kPa
- Maximum Pressure - Equipment - Lift Mode - 5510 psi / 38000 kPa
- Maximum Pressure - Travel - 5075 psi / 35000 kPa
- Maximum Pressure - Swing - 4175 psi / 28800 kPa
- Swing Speed* - 10.8 r/min / 10.8 r/min
- Maximum Swing Torque - 79455 lbf·ft / 107.7 kN·m
- Note (1) - *For CE-marked machine default value may be set lower.
- Operating Weight - 77000 lb / 34900 kg
- Note - Long undercarriage Reach boom, R3.2 (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 600 mm (24") triple grouser shoes, 5000 kg (11,202 lb) counterweight and 3440 mm (11'3") blade.
- Fuel Tank Capacity - 97.2 gal (US) / 368 l
- Cooling System - 3.3 gal (US) / 13 l
- Engine Oil - 6.6 gal (US) / 25 l
- Swing Drive - 2.9 gal (US) / 11 l
- Final Drive - Each - 1.8 gal (US) / 7 l
- Hydraulic System - Including Tank - 92.5 gal (US) / 350 l
- Hydraulic Tank - 40.7 gal (US) / 154 l
- DEF Tank - 7 gal (US) / 26 l
- Boom - Reach 6.15 m (20'2")
- Stick - Reach 3.2 m (10'6")
- Bucket - HD 1.54 m³ (2.01 yd³)
- Shipping Height - Top of Cab - 10.7 ft / 3270 mm
- Handrail Height - 11.2 ft / 3430 mm
- Shipping Length - 32.2 ft / 9830 mm
- Tail Swing Radius - 6.2 ft / 1900 mm
- Counterweight Clearance - 3.8 ft / 1170 mm
- Ground Clearance - 1.6 ft / 480 mm
- Track Length - 16.5 ft / 5030 mm
- Length to Center of Rollers - 13.3 ft / 4040 mm
- Track Gauge - 9 ft / 2740 mm
- Transport Width - 11 ft / 3340 mm
- Maximum Digging Depth - 22.9 ft / 6990 mm
- Boom - Reach 6.15 m (20'2")
- Stick - Reach 3.2 m (10'6")
- Bucket - HD 1.54 m³ (2.01 yd³)
- Maximum Reach at Ground Level - 34.9 ft / 10640 mm
- Maximum Cutting Height - 36.6 ft / 11150 mm
- Maximum Loading Height - 26.1 ft / 7960 mm
- Minimum Loading Height - 9.5 ft / 2910 mm
- Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 22.4 ft / 6840 mm
- Maximum Vertical Wall Digging Depth - 19 ft / 5790 mm
- Bucket Digging Force - ISO - 46482 lbf / 207 kN
- Stick Digging Force - ISO - 32319 lbf / 144 kN
- Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system contains 0.9 kg (1.98lb) of refrigerant which has a CO2 equivalent of 1.287 metric tonnes (1.418 tons). If equipped with R1234yf (Global Warming Potential = 0.5), the system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons).
- Recyclability - 98%
Standard Equipment
- note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- boom and sticks
- 6.15 m (20'2") Reach boom
- cab
- Rollover Protective Structure (ROPS)
- Air-adjustable seat with heat (Deluxe only)
- Auto-adjustable seat with heat and air ventilation (Premium only)
- High-resolution 254 mm (10 inch) LCD touchscreen monitor
- cat technology
- VisionLink™
- Remote Flash
- Remote Troubleshoot
- Work tool recognition and tracking (PL161)
- Cat Grade with 2D
- Cat Assist
- Cat Payload
- electrical system
- Maintenance-free batteries
- LED chassis light, left-hand/right-hand boom lights, cab lights -1800 lumens
- Centralized electrical disconnect switch
- Programmable time delay working lights after engine shutdown
- engine
- Cat C7.1 twin turbo diesel engine
- Three selectable modes: Power, Smart, Eco
- 52°C (126° F) high-ambient cooling capacity with derate
- -18°C (0° F) cold start capability
- Sealed double element air filter with integrated precleaner
- 1 x 145 Amp. dual alternator
- Electric fuel priming pump
- Hydraulic and reversible demand fan
- Two-stage fuel filtration system with water separator and indicator
- hydraulic system
- Electric main control valve
- Boom and stick regeneration circuits
- Auto hydraulic oil warm up
- Auto two-speed travel
- Boom and stick drift reduction valve
- Element type main hydraulic filter
- safety and security
- 2D E-Fence
- Auto hammer stop
- Rear- and right-side-view cameras
- Right-hand handrail and hand hold
- Service platform with anti-skid plate and countersunk bolts
- Hydraulic lockout lever neutralizes all controls
- Ground level-accessible secondary engine shutoff switch in cab
- Lockable disconnect switch
- Signaling/warning horn
- service and maintenance
- Scheduled Oil Sampling (S·O·S℠) ports
- Grouped location for engine oil and fuel filter
- Integrated vehicle health management system
- undercarriage and structures
- Grease lubricated track
- Tie down points on base frame
Optional Equipment
- note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- boom and sticks
- 3.2 m (10'6") Reach stick
- 3.75 m (12'4") Reach stick
- cab
- Operator Protective Guards (OPG)
- Cat Stick Steer
- Auxiliary relay
- cat technology
- Operator Coaching
- Cat Grade with 2D with Attachment Ready Option (ARO)
- Cat Grade with 3D (single or dual GNSS)
- Cat Grade 3D Ready
- Cat Grade Connectivity
- Cat Advanced Payload
- Cat Tiltrotator (TRS) integration
- engine
- -32° C (-25° F) cold start capability
- hydraulic system
- SmartBoom™ (Europe only)
- Hydraulic efficiency monitoring
- safety and security
- Cat Command (remote control)
- 360° visibility
- Swing alarm
- Inspection lighting
- undercarriage and structures
- 5000 kg (11,020 lb) counterweight
- 7700 kg (16,980 lb) counterweight
- 600 mm (24") triple grouser track shoes
- 700 mm (28") triple grouser track shoes
- 850 mm (33") triple grouser track shoes
- 3440 mm (11'3") blade
- 3600 mm (11'10") blade
Impulse Force
24669 lb / 110 kN
Base Plate Width
34 in / 864 mm
Blows per Minute
450 to 800
Minimum Operating Weight
3098 lb / 1405 kg
Blows per Minute
370 to 800
Minimum Operating Weight
2354 lb / 1070 kg
Blows per Minute
400 to 800
Minimum Operating Weight
3849 lb / 1746 kg
Blows per Minute
350 to 620
Minimum Operating Weight
3256 lb / 1480 kg
Blows per Minute
350 to 700
Minimum Operating Weight
5503 lb / 2496 kg
Blows per Minute
320 to 600
Minimum Operating Weight
3850 lb / 1750 kg
Blows per Minute
325 to 540
Minimum Operating Weight
5302 lb / 2410 kg
Blows per Minute
200 to 450
Minimum Operating Weight
6688 lb / 3034 kg
Blows per Minute
400 to 505
Minimum Operating Weight
7106 lb / 3230 kg
Cycle Time - Open
1.6 s / 1.6 s
Excavator Minimum
18 tons
Cycle Time - Close
1 s / 1 s
Cycle Time - Open
1.6 s / 1.6 s
Excavator Minimum
18 tons
Cycle Time - Close
1 s / 1 s
Cycle Time - Open
1.6 s / 1.6 s
Excavator Minimum
18 tons
Cycle Time - Close
1 s / 1 s
Cycle Time - Open
1.6 s / 1.6 s
Excavator Minimum
18 tons
Cycle Time - Close
1 s / 1 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.8 s / 1.8 s
Excavator Minimum
24 tons
Cycle Time - Close
1.2 s / 1.2 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Excavator Minimum
32 tons
Cycle Time - Close
1.3 s / 1.3 s
Cycle Time - Open
1.9 s / 1.9 s
Cycle Time - Close
1.3 s / 1.3 s